Buying guide
One GaN charger for MacBook Air, iPhone, and iPad
Short answer: Yes. Use one multi-port 65W (or 100W) GaN brick, put the Air on the highest-watt USB-C port, and keep a labeled 100W USB-C cable for the laptop. Phones and recent iPads share the remaining ports safely because each device only draws what it asks for.
As an Amazon Associate, The Cable Edit may earn from qualifying purchases.
Minimum
65W multi-port GaN
Air cable
100W USB-C
Skip
Three separate bricks
Why one brick works
USB-C Power Delivery lets the device request power. A 65W GaN charger can feed an Air while an iPhone or iPad shares a second port. If you often charge Air + iPad hard at the same time, step up to 100W so the laptop port keeps more headroom.
Port order that actually matters
- MacBook Air on the highest-watt USB-C portBest charger for MacBook Air | GaN travel guide | Why wattage matters
Manufacturer-stated wattage unless labeled otherwise. Confirm the live Amazon listing before you buy.
i>
If battery percent on the Air stalls while you work, unplug the tablet first. Shared total wattage is the usual culprit, not a broken laptop.
Complete the setup
1. Everyday multi-device
Anker 735 65W GaN
Two USB-C + USB-A. Fine for Air plus phone or tablet.
2. More headroom
Anker 736 100W GaN
Better when Air and iPad both charge hard.
3. Air charge cable
Anker 333 USB-C (6ft, 100W)
Labeled 100W. Not for monitors.
Buy nothing extra if
- You already have a labeled 65W+ multi-port GaN and a 100W USB-C cable
- You only charge one device at a time
- Your Air already keeps charge under load with the current brick